- #Techsoft 2d design tutorial how to
- #Techsoft 2d design tutorial install
- #Techsoft 2d design tutorial full
Nothing is worse than taking the material out of the laser and finding that it didn't cut all the way through.
#Techsoft 2d design tutorial full
Test cuts: Even when I have a preset for cutting a material I usually try to run a test cut in it before I run the full job. Be sure to name them something that makes sense so you can easily find them That way the next time you need to engrave on leather or cut 1/8" thick acrylic, you can just find the preset for that material. You should also be able to load these settings into your computer or laser and save them as presets.
Presets: Your laser should have some suggested settings for cutting or engraving different materials and different thicknesses. I use this a lot if I'm engraving on leather. After running the engraving just peal the masking tape off. The masking tape won't decrease the power of the laser much (bump up the power a bit if you feel it needs it) and the masking tape will protect the material around the engraving from the smoke. If you don't want that cover the surface with masking tape to protect it. Masking: If your going to engrave on something be aware that the smoke for the the engraving can stain the edges of the engraved surface. For several of my tricks you need your file to be a vector file for the trick to work.īefore we get to tips for cutting and engraving, lets start with some good ideas for preparing to cut or engrave. You can engrave with either vector or bitmap files. With the Epilog laser (and I'm assuming other ones) you can only cut with a vector file. This included digital photos, Adobe Photoshop files, JPGs etc. Bitmap files are collections of individual pixels. These are created by programs like Adobe Illustrator, Inkscape, AutoCAD and Corel. Vector files are mathematical formulas defining lines, circles etc. Note: For several of these tips it is important to understand the difference between Vector files and Bitmap files. I'm going to try to write in general terms so you can use what ever laser and program you want to. The laser I work with is an Epilog Helix and the program we use to run it is Corel Draw.
#Techsoft 2d design tutorial how to
As a result, I've learned a few tricks for how to set up jobs to get the best results, and in this Instructable I'm going to pass them on to you. My job is to take in customer's projects, set them up and run them on the laser. TechSoft have been supplying LaserCAM to schools for over twelve years and remain committed to providing the best technology and the highest level of service needed to secure your investment for the long term.Hello, I'm Geordie and I currently work at ADX Portland running the Laser Cutter and Engraver. Suitable material up to 12 - 15mm thick will cut well and the power of the laser will largely dictate speed of cut rather than ultimate depth.Ī TechSoft LaserCAM package is supplied and installed with everything you need so laser cutting and engraving can start right away. There’s no harm in experimenting with ‘stock’ material but for reliable results TechSoft supply laser-quality plywood and MDF in a range of thicknesses. Some timber products give inconsistent results due to density, or the resins used in manufacture. Although initially more expensive, our experience finds that the tubes last for on average around seven years so longevity is assured.Īpart from metals and vinyls, most workshop plastics, textiles and graphic materials are fine. LaserCAM Star is the only laser cutting and engraving machine on the market to have this ‘designed-in’ compatibility.
TechSoft have developed features in TechSoft Design V3 (formerly 2D Design V2) to make output direct and seamless. These machines are high quality machines with air-cooled metal CO₂ laser tubes. LaserCAM Star Range (Air-Cooled Metal Tubes)įor well over a decade TechSoft have been supplying the LaserCAM Star Range (formerly just known as LaserCAM). In addition, you will have unlimited access to technical support by phone or email. We are proud of our reputation for excellent customer service and person-to-person contact is an important feature of this.
#Techsoft 2d design tutorial install
TechSoft will install your machine, provide training, and be your first point of contact in case of a problem, so any issues will be dealt with quickly. TechSoft have an exclusive arrangement to supply LaserCAM and we work closely with the manufacturers to ensure that the machines meet all necessary standards for price, safety and quality.
0 kommentar(er)
